Standalone Carbon Monoxide Detector En50291 Certificate

Overview

Basic Info.

Model NO.	JM -ZL2031
Transmission Mode	Wireless
Alarm Volume (within 1m)	[email protected] Meters
Receive Frequency	Standalone
Operating Temperature	-10~40 Degree Centigrade
Alarm Current	Greater Than 45mA
Installation Mode	Fasten by Screw or 3m Glue or Standing
Operating Humidity	≤ 95%
Sensor Life	10 Years
Standby Current	Greater Than 30ua
Standard	En50291-1:2018
Power Supply	DC3V(AA Alkaline Battery *2PCS)
Transport Package	Carton
Specification	140mm*70mm*28mm
Trademark	Zorroalert
Origin	China
HS Code	8531100000
Production Capacity	2000000PCS/Year

Product Description

Standalone CO alarm Carbon Monoxide Detector

The JM-ZL2031 household standalone carbon monoxide detector (detector) can detect carbon monoxide gas leakage, prevent the damage caused by the leakage, it adopts high-stability electrochemical gas sensor, with characteristics of stability, minor sensitivity drift etc.The detector flash red with alarm sound when the alarm detects a carbon monoxide gas leak and reaches the alarm condition set by the alarm.This detector is suitable for installing in residential houses with potential CO gas occurrence.

Product Description

1. Electrochemical Sensor2. Digital Temperature Compensation3. Battery Low Voltage Alarming4. Sensor Faults Detection Automatically 5. Anti-reverse and anti-leakage function of battery, more safety

Product Parameters

Power Supply	DC3V ( AA alkaline battery * 2pcs )
Standard	EN50291-1:2018
Sensor Life	10 years
Battery Life	1~2years
Sensor Model	ZA-COX1
Standby Current	<30uA
Alarm Current	<45mA
Alarm Sound	≥[email protected]
Operating Temperature	-10~40 °C
Operating Humidity	≤ 95%
Installation Mode	fasten by screw or 3M glue or standing
Product Size	140mm*70mm*28mm
Alarming Status	When CO concentration is 30ppm, no alarm within 120minutes. When CO concentration is 300ppm, alarm within 3minutes. When CO concentration is 100ppm, alarm within 10-40minutes. When CO concentration is 50ppm, alarm within 60-90minutes

Detailed PhotosInstallation Instructions1) Slide the mounting plate down. Then remove the transparent plastic
film on the battery, and insert the 2 AA batteries, observing polarity.
2) Drill two 4mm diameter holes in the wall with a spacing of
62mm,Then insert two plastic plugs into the holes, Align the
hanging plate hole in the package with the plastic plug hole,
Finally fix it with screws until the screw heads fit snugly against
the siding . Or use the self-adhesive tape.
3) Press the Self-test button, guarantee the device can alarm
with sound and light.
4) Align the holes on the back of the device to the mounting
plate, and install it.Certifications

Company Profile

FAQ

Q1: Are you manufacture or trading company?A1: We are a professional manufacturer specializing in security alarms and smart home solutions, like smoke detectors, carbon monoxide detectors, carbon dioxide alarm, gas detectors etc. Q2: How long is the lead timeA2: It depends on the order quantity and production arrangement,generally 5-45 days. Q3: What is the MOQ?A3: If you don't need custom packaging, then any order quantity is welcome.If custom packaging is required, then generally MOQ: 1000pcs/model. Q4: What payment methods can i chooseA4: We accept Paypal, T/T, L/C… Q5: How long is the warranty time of the products?A5: There will be 2-3 years for warranty time. Q6: What's the ceritification you haveA6: Our factory approved by TUV ,BSCI and ISO9001:2015, ISO14001 and Oursecurity alarms certification Obtained such as TUV, Intertek,BOSEC, CE, EMC, ROHS, REACH…
Safety lies in professional dedication.